Crawl Space Encapsulation in Iron Station, NC

Have you been having a moisture problem at your home in Iron Station, North Carolina? It is very humid in the Iron Station area, and where there is humidity there is a lot of moisture. Moisture can create many problems. One of the biggest problems that will come from moisture is mold. Mold likes to find dark damp places to grow, and one of the best places for mold is a crawl space. With our crawl space encapsulation in Iron Station, North Carolina, you won’t have to worry about that mold. If you are curious about what crawl space encapsulation is, take a look below and we will explain it to you.

Crawl Space Encapsulation Benefits:

  • Stop mold from growing
  • Stop structural damage from occurring
  • Save money by reducing energy bills
  • Less strain on your heating and A/C unit
  • Keep hardwood floors from cupping or buckling
  • Lower the chances for termite or pest infestation
  • Increase indoor air quality
  • Increase the value of your biggest asset!

Wanting to completely seal off your crawl space after seeing all that you can benefit from? We’ve got you covered. We offer crawl space encapsulation in Iron Station, NC, to our customers that want to completely encapsulate the area below their home or business. By encapsulating the area below your home or business you are able to keep moisture out. In addition, you also keep out bugs such as cockroaches, spiders, and termites. By encapsulating the crawl space you can avoid forking out money to repair structural damages caused by moisture.

How the Encapsulation Works:

  1. We complete a comprehensive home examination to find out why and where the issues, if any, are coming from.
  2. We then remove any standing water issues and install a perimeter drainage system to a sump pump. This solves any water intrusion problems that may be occurring.
  3. The start of the encapsulation begins with mechanically fastening 2.5” foam board insulation to the foundation walls. Then we use this same foam board to permanently seal your foundation vents from the inside. Sealing these vents is critical to the overall functionality of this system. This stops the hot, moist outside air from coming in and creating condensation on all of the cool surfaces inside the crawl space. Also, this particular foam board is not just your average foam board from Lowes. It is specifically made for crawl spaces by having a built-in, 6 mil moisture barrier and is chemically treated to resist termites.
  4. When finished with all of the insulation board, we will go back over the top of it with a 6 mil (for a total of 12 mil) moisture barrier and wrap the walls. This completely seals the walls of your crawl space.
  5. We then wrap your piers with a reinforced 12 mil polyethylene moisture barrier. Starting from the ground we will wrap the piers all the way to the top. Then we will mechanically fasten the liner to the pier. We also tape the top and the seam to ensure that it is fully sealed.
  6. Next, we will install a 12 mil reinforced moisture barrier covering the entire crawl space floor. This moisture barrier will overlap (8”-12”) and be sealed to the moisture barrier that is on the walls and piers using a 4” waterproof tape.

What happens when the crawl space encapsulation in Iron Station is finished?

Now, we progress to treating the remaining moisture that is in the crawl space from any mechanical appliances. We will install an industry-leading, Aprilaire or Santa-Fe commercial dehumidifier. This unit will initially run for a few weeks until it can remove all the moisture from the subfloor, floor joist, etc. that is present in the crawl space. After the first few weeks, this unit will not have to run near as much. This is because of the fully sealed crawl space that only cutting on every so often as it deems necessary. These Aprilaire and Santa Fe dehumidifiers are energy star rated. They have a built-in humidistat (turning itself on and off automatically). The condensation drain line will remove the water from your crawl space without the homeowner having to empty any buckets. These units also have a specially built filter and are built to help filter the air of mold spores and dust which will increase the indoor air quality inside the home. The final step is to monitor the crawl space. By monitoring, we do not mean coming back once a year to assess your home. It only takes days for mold to grow and for this reason, we will install a 24/7/365 WIFI monitoring system. This system will constantly monitor the humidity, temperature, dew point, and any standing water that may occur in the crawl space. The monitoring system will also automatically send us alerts should any of the moisture levels get above the ideal range. It can tell us many things about the crawl space, including plumbing leaks, equipment failure, water intrusion, and more.

Watch the video below to see a completed crawl space encapsulation in North Carolina.

Have A Fungal Growth Problem?

Here at Advanced Vent Solutions, we don’t just service Iron Station, NC. IF you are curious if we service your area look below to see if it is listed, click here, or call us with your questions!